Procomp Electronics ~ NHRA Las Vegas Motor Speedway Motorsport Race Meeting

Motivation and team moral was high, as Mike Strasburg was able to show off his new "Procomp Tear Off" design to all the fans. Being the 3rd round of the NHRA Full Throttle season, like usual Mike and the Procomp Electronics team were ready for a weekend of hard work and excitement. When it was time to stage, the Top Fuel Dragster was able to pull consecutive qualifying lap times in the attempts of top qualifying:

Round 1 - 6th - 4.165 @ 289.14 mph
Round 2 - 8th - 4.039 @ 306.19 mph ~ Incremental times: 60ft-0.895 sec., 330ft-2.285, 660ft-3.245 @ 265.90 mph.
Round 3 - 9th - 4.500 @188.25 mph

Now that qualifying was up, Mike and the Procomp Electronics team were able to concentrate on producing similar run times for the following Elimination round against Shawn Langdon. This is the first time Langdon and Strasburg have faced each other in eliminations. However, Langdon was first off the line and able to snatch the win:

Shawn Langdon - 0.051 - 4.020 @ 299.53 mph
Mike Strasburg  - 0.073 - 4.142 @ 288.09 mph

All in all it was a good weekend, as the Procomp Electronics team were satisfied with the results Las Vegas had given them. Therefore Procomp Electronics team were able to leave with their heads up high, as the times and telemetry showed slight improvement from previous race meetings. And the debut of the Procomp Electronics - 2010 "Procomp Tear Off" design was also a hit with the fans and a positive sign for the future.

NEW - Procomp Electronics Top Fuel Dragster Design

The design of the NEW 2010 Top Fuel Dragster has been released by the Procomp Electronics Marketing division. As they say this years design will be known as the "Procomp Tear Off". With the its introduction originating on the, Deno Brijeski, driven Top Doorslammer race car, and now the "Procomp Tear Off" will be featured on the Top Fuel Dragster of Mike Strasburg.